A PE elbow turns a polyethylene water line where the pipe cannot bend enough.
Tell us the pipe size in mm and the quantity. Then we will confirm stock and send a quote.
What is a PE elbow?
A PE elbow turns a polyethylene pipe run, usually through 90 degrees. It is used where the line must turn sharper than the pipe can bend.
Small elbows are compression fittings with a nut and O-ring at each end. Large elbows are fusion fittings. Both stay free of rust underground.
Further reading
- High-density polyethylene (HDPE) explained (Wikipedia)
- Plastic pipework materials compared (Wikipedia)
- Plastic welding and fusion joining (Wikipedia)
Key terms explained
- HDPE
- High-density polyethylene, a tough, flexible plastic used for water and gas pipes.
- PE100 and PE80
- Grades of polyethylene. PE100 is stronger, so pipes can have thinner walls for the same pressure.
- PN rating
- Pressure Nominal, the working pressure in bar, such as PN10 or PN16.
- SDR
- Standard Dimension Ratio: outside diameter divided by wall thickness. A lower SDR means a thicker, stronger wall.
- Butt fusion
- Joining two HDPE pipe ends by heating them and pressing them together.
- Compression fitting
- A fitting that seals on the pipe with a nut, split ring and rubber O-ring, with no heat needed.
Features and benefits
- Turns HDPE lines through a fixed angle.
- Compression or fusion joints.
- Corrosion-free body.
- Smooth bore for good flow.
Technical specifications
| Product | PE Elbow |
|---|---|
| Material | Polyethylene or polypropylene body, depending on type |
| Joint | Compression or fusion, depending on type |
| Use | HDPE water lines |
| Sizes | State the pipe OD in mm or inches when you request a quote |
| Supplier | Sparks Plumbing Experts Ltd, Nairobi |
Sizes, PN rating and joint type (compression or fusion) depend on stock. Tell us the pipe size in mm and the quantity.
Applications of a PE elbow
- Trench corners. Turns buried mains at boundaries and corners.
- Tank connections. Turns pipe up or down at tanks.
- Borehole headworks. Turns delivery pipe at the wellhead.
- House connections. Turns service lines up to the tap.
- Irrigation layouts. Turns mains at field edges.
- Pump lines. Turns suction and delivery pipe at pumps.
- Road crossings. Turns pipe into and out of crossings.
- Repairs. Replaces damaged bends in existing lines.
How to choose and install
- Match the elbow to the pipe OD in mm.
- Let the pipe bend gently where it can, and use elbows for sharp turns.
- Push the pipe fully in before tightening.
- Anchor elbows on large pressurised mains.
Why choose Sparks Plumbing Experts
- Every common pipe materialGI, PPR, PVC, HDPE, brass and stainless fittings are all stocked, so you can match any existing system.
- Common sizes in stockMost fitting types come in several sizes, from small domestic sizes up to larger mains sizes.
- Pipes, fittings and valves togetherPipes, fittings, valves, clamps and jointing products come in one order.
- Help with thread and size standardsWe help you confirm inch and millimetre sizes before you buy, which avoids return trips.
- Visit or collect in NairobiOur store is at KCB Building, Enterprise Road, in the Industrial Area, so you can see parts before you buy or collect your order.
- Quotes your wayAsk for prices by phone, WhatsApp, email or the online quote form, whichever suits you on site.
- Over 1,600 products in one placeOur catalogue covers 55 categories, so one supplier can handle most of your parts list.
- Help choosing the right partSend a nameplate photo, a drawing or the old part, and we help you match size and specification.
- Single items or project quantitiesWe price a single replacement part just as readily as a full site order.
- Supply across East AfricaWe serve customers across Kenya, and we also supply buyers in Uganda and Tanzania.
Related products and accessories
Browse more: HDPE Pipes & Fittings · Valves · Flanges · Tapes.
Ordering from Sparks Plumbing Experts
We supply customers across Kenya, and we also serve buyers in Uganda and Tanzania. You can collect from our store at KCB Building, Enterprise Road, Nairobi, or ask us about delivery to your site. Send your quantities and specifications, and we will reply with prices and availability.
Request a Quote WhatsApp 0726 086 895
Frequently asked questions
Can I order PE elbow fittings in bulk?
Yes. Include sizes and quantities in your quote request.
What details do you need to quote PE elbows?
Tell us the size in mm or inches, the pressure rating (PN) and the quantity. A photo of the old part, a nameplate or a drawing also helps. Then call or WhatsApp 0726 086 895, or use the quote form on this page.
Do you deliver PE elbows outside Nairobi?
Yes. We supply customers across Kenya, and we also serve buyers in Uganda and Tanzania. Delivery or courier arrangements are agreed when you confirm the order.
How much does a PE elbow cost in Kenya?
The price depends on the size, the pressure rating and the quantity. Therefore, send your list with a quote request and we will reply with current figures.
Can PE elbows be buried?
Yes. HDPE is well suited to burial. Bed it in sand or fine soil and keep sharp stones away.
Do PE elbows resist sunlight?
Black HDPE contains carbon black, which protects it from UV. Even so, burying or shading pipe extends its life.
When do I need a PE elbow?
When the line turns more sharply than the pipe can safely bend.
Can a PE elbow be reused?
Compression elbows can, if the O-ring and threads are sound.
What angle is a PE elbow?
Usually 90 degrees. Ask us for 45 degree elbows.
People also search for
HDPE bend vs elbow
A bend has a larger radius and lower loss. An elbow turns sharply in a small space.
minimum bend radius HDPE pipe
HDPE can bend gently without fittings. Ask the pipe maker for the minimum radius for your size.
PE elbow price in Kenya
Prices change with size, model and quantity. Request a quote from Sparks Plumbing Experts for current figures.
HDPE vs PVC pipe
HDPE is flexible and fusion or compression jointed. PVC is rigid and glued.
HDPE vs PPR pipe
HDPE suits buried cold water mains. PPR suits hot and cold water inside buildings.
HDPE pipe sizes in mm
HDPE is sized by outside diameter, for example 20, 25, 32, 50, 63, 90 and 110 mm.
PN10 vs PN16 HDPE
PN16 pipe has a thicker wall and is rated for higher pressure than PN10.
Reviews
There are no reviews yet.